Living with Natural Hardwood Floors Solid hardwood floors repay a little care with a lifetime of value. When you first glimpse a solid hardwood floor, you sense richness, warmth and natural beauty. Gradually, you get to know its distinct personality -- visual harmonies, the traces of history in the forest and in your home.
Take a closer look.
Appreciate the color and pattern of the floor’s strips, planks or parquetry.
Read the grain: Is it bold-textured oak? Subdued maple or cherry?
Check the condition of the underlying wood and the finish that protects it. Are there signs of neglect to erase (it’s not difficult), or do you see a well-tended surface that needs just a light touch to maintain it?
Nature’s diversity lets you create dramatic looks with unique textures, colors, patterns and styles of solid hardwood flooring.
Protect Your Solid Investment Solid hardwood floors are among the easiest to keep clean. Protect their warmth and character with simple, everyday cleaning techniques.
It’s important to know how to prevent damage to your solid hardwood floors.
DIRT and GRIT : Dirt, grit and sand are your hardwood floor’s worst enemies.
They act like sandpaper on the finish, causing scratches, dents and dulling. Place floor mats at entrances to trap dirt and prevent damage.
WATER AND OTHER SPILLS : Standing water can warp a poorly finished hardwood floor and can damage the finish. Simply wipe up all spills as they happen.
HARD CLEANERS : Avoid oil soaps. They can build up and create problems when it’s time to put a maintenance coat on the floor. Instead, neutral pH cleaners made specifically for wood floors are recommended.
FURNITURE : Lift the furniture to move it --- avoid dragging. Felt contacts under the legs will help prevent scratches.
DENTS : Vacuum with a brush attachment -- don’t use vacuums with beater bars.
SUN : Direct sun can discolor your hardwood floor. Close curtains and blinds or add sheer drapes to protect from the sun’s intense UV rays.
SWEEP : Brooms with fine, exploded ends trap dust and grit effectively.VACUUM : Canister vacuums with special bare floor attachments are the surest way to get rid of all the dirt and dust.DUST MOP : Use a good dust mop --- one with a 12- to 18- inch cotton head ---- and a special dust mop treatment. Spray the treatment onto the mop head 12 to 24 hours before dust mopping.Oak and maple are the most popular hardwoods used in flooring. Ash, beech,birch, cherry, hickory and walnut are other favorites for floors and decorative accents.Does Your New Hardwood Floor Look Old?
Perhaps your hardwood floors were installed just a few years ago, but you haven't taken care of them and now they look old. What can you do? Before you do anything, check the condition of the finish and the wood to see whether they need special cleaning or more involved repair.
What condition is your floor in?
Follow these steps to evaluate the condition of your hardwood floor and its finish.
Finish Condition: Has the finish been worn off or is it just dirty? See if the finish is dull, chipped, scraped or gouged. To test if the finish has worn off, begin in a high-traffic area and pour one to two tablespoons of water onto the floor. If the water soaks in immediately and leaves a darkened spot, the finish is worn and water can damage the wood. If the water soaks in after a few minutes and darkens the wood only slightly, the finish is partially worn. If the water beads on top, the surface is properly sealed. Repeat this test in low- and medium-traffic areas.
Wood Condition: It the finish is worn, the wood may have been damaged. Are there stains, burns, cuts, gouges, holes, cracks or warped boards? If the wood is damaged, repair or replacement may be required before you deep clean your floor or apply a maintenance coat.
What type of finish does your floor have?
The same care and maintenance techniques are used for all finishes in good condition, but when it comes to removing stains or restoring the finish, methods differ. If you don't know what kind of finish your floor has, ask your contractor or Realtor, or try these simple tests:
Surface Finishes: (pre-finished floors, polyurethane, water-based urethane and catalyzed)Nearly all floors installed today have surface finishes, mostly polyurethane. They are often glossy and may look like a layer of clear plastic on top of the wood. A small amount of paint remover in an inconspicuous area of the floor will cause the surface finish to bubble (unless it is a water-based urethane, in which case there will be no reaction). Surface finishes shield floors from harm by forming a protective layer on top of the wood.